Rgb-spectrum Quadra User's Guide Manuel d'utilisateur télécharger pdf (Page 83)

COMMAND LINE INTERFACE

Command Summary

350-7951 Quadra User’s Guide 75

. . . . .

MISCELLANEOUS COMMANDS DESCRIPTIONS

The table below lists all miscellaneous commands, their arguments and detailed

descriptions.

Table 4-15.

MIscellaneous Commands Descriptions

Command Arguments Description

BackGroundSouRCe <output #> [RedRAMP |

GreenRAMP |

BlueRAMP |

WhiteRAMP |

HRedRAMP |

HGreenRAMP |

HBlueRAMP |

HWhiteRAMP] |

[<RGBColorVal>

<RGBColorVal>] |

[WHITE | BLACK | RED

| GREEN | BLUE |

MAGENTA | CYAN |

YELLOW]

Selects a shaded or solid background for the

specified output. For example:

• RedRAMP provides a red background

shaded from top to bottom of the output.

• HRedRAMP provides a red background

that is shaded from left to right.

To select a solid background color, enter the RED,

GREEN or BLUE color values (0… 255) for the

required color, or select one of the eight pre-

defined saturated colors.

To turn off a shaded background use BGSRC 0 0

0 or the command BGC BLACK.

Help [command] Help, without an argument, displays the entire

serial command set. Help, with a command as an

argument, displays detailed information about that

command.

ID (none) Quadra responds to this command with a list of

system information. The list consists of firmware

and hardware version numbers and other system

information such as the IP address.

RestoreFactoryDefaults (none) Restores all user settings to their factory default

values and restarts the system.

RECALLCONFIGuration (none) Manually recalls (restores) customer configuration

parameters that were manually saved by the

SAVECONFIGguration

command.

Note: The configuration is automatically saved

after every change. The system configuration is

automatically restored following a power cycle.

This command could be used as the user specified

alternative to RestoreFactoryDefaults

SAVECONFIGguration (none) Forces an update and explicit save of the system’s

NVRAM. This is used to provide user defined

default settings.

Note: These settings are loaded only when the

RECALLCONFIGuration

command is used.

The configuration that is loaded following a power

cycle represents the state of the machine prior to

loss of power, not those saved by this command.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Rgb-spectrum Quadra User's Guide Manuel d'utilisateur Page 83

Commentaires sur ces manuels