Rgb-spectrum Quadra User's Guide Manuel d'utilisateur télécharger pdf (Page 44)

OPERATIONS

Understanding Auto Sync

350-7951 Quadra User’s Guide 36

. . . . .

• If you want to “interactively” time an input, please continue with the

“Performing Interactive Input Timing

” section.

• To name and save a custom set of input timing parameters, continue

with the “Naming and Saving Input Timing Values

” section.

PERFORMING

INTERACTIVE INPUT

. . . . . . . . .

TIMING

If you want to “fine tune” a set of timing parameters visually, you can use the

INputINTeractive

command. Using a white box which appears around the

input image, you can precisely align the upper left and lower right corners of the

image — precisely scaling the image to match the display raster.

The procedure is fully explained in the “Input Timing

” section in Chapter 2.

NAMING AND

SAVING INPUT

. . . . . . . . .

TIMING VALUES

If you have loaded a custom set of timing parameters or performed the

“Interactive” timing adjustment, it is highly recommended that you name and

store the settings in the “user” section of the Factory Timing List. In this way,

the next time Quadra is turned on and RGB inputs are used, when the “Auto

Sync” search through the list is performed, your saved settings will be loaded.

Use the following steps to name your custom timings:

1. Request help text for the INputNAME

command. Type:

H INNAME Enter

This action displays the command’s parameters and variables.

Figure 3-9.

Help Text — Input Name Command

2. To name the specified RGB input timings, type:

INNAME <input #> [name] Enter

The name can be up to 23 alphanumeric characters in length, with no

spaces (use an underscore for a space).

S Example: To name RGB input 3 as “Boardroom PC 1,” type:

INNAME 3 Boardroom_PC_1 Enter

3. Confirm the name by querying the command. Type:

INNAME <input #> Enter

4. Request help text for the INputSAVE

command. Type:

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Rgb-spectrum Quadra User's Guide Manuel d'utilisateur Page 44

Commentaires sur ces manuels